System parameters for incoming call

In the ACE Admin System parameters window Incoming call tab the functionality for incoming calls is configured.

Short name and description	Explanation	Default value	Enabling method
agentDistrOrderCallIncoming Route to template waiting list before template queue (incoming call) .	The parameter makes it easier for the administrator to configure whether a contact directly routed to a certain agent is placed in the agent's personal waiting list or the agent's personal queue as first choice. Also takes care of the handling of contacts without correct routing.		Restart Changes take effect when ACE Server is restarted.
callToVoicemail Allow agent to call directly to personal voice mail in solution with Touchpoint Plus .	Allows agents to call, make inquiry and transfer calls directly to a personal voice mail. Only available in solutions integrated with Telia Touchpoint Plus.		Login Changes take effect per single agent the next time the agent logs in.
enableAnswerUnknownCall Allow a call to be answered before the arrival of contact data.	The agent may answer a call before the server knows the type (contact data can not be shown at this point).		Restart Changes take effect when ACE Server is restarted.
maxDlvFailedCallIvr Max permitted failed deliveries of IVR calls.	An integer for max number allowed failed deliveries IVR calls. After that the call is terminated.	10	Auto Changes take effect immediately.
maxDlvFailedCallIvrExt Max permitted failed deliveries of IVR calls routed externally.	An integer for Max failed deliveries of IVR calls routed externally. Used by solutions of the VCC type.	0	Auto Changes take effect immediately.
maxParkedCallIncoming Max no parked calls per agent.	If the agent tries to park more IVR calls than this parameter specifies, the operation will fail. For solutions not of the ACE VCC type, a licence for the Park and queue calls Enterprise is required.	1	Restart Changes take effect when ACE Server is restarted.
maxRecursivePark Number of times the same call may be parked in the IVR (0 = no check is made).	Limits the resource use for call costs and switch lines for parking in IVR Enterprise. The value 0 means that no check is made. Requires licence for the Park and queue calls Enterprise function.	0	Restart Changes take effect when ACE Server is restarted.
mobileFailedTimer Mobile login/Mobile Agent, pause time at failed delivery (s).	Applies to Mobile login as well as ACE Mobile Agent. Indicates how long a mobile agent will be paused at routing failure for a call (busy tone, barrier). The value is given in seconds and the agent will be in status ready automatically after the set time. See also mobileLogin Time parameter.	180	Restart Changes take effect when ACE Server is restarted.
mobileLoginTimer Mobil login, time an agent is paused at login (s).	Applies only to Mobile login (i.e. not for ACE Mobile Agent). Indicates how long a mobile agent, will be paused in connection to login or status check. The value is given in seconds and the agent will be in status ready automatically after the set time.	45	Restart Changes take effect when ACE Server is restarted.
mobileMaxCallTime Mobile login, max expected call time (s).	Applies only to Mobile login (i.e. not for ACE Mobile Agent). Specifies the maximum expected call time for a mobile agent. The call will be considered ended and the agent will end up in wrapup/Ready automatically after the specified time, unless the call has been ended before. The purpose of the parameter is to avoid endlessly long call times, in case a signal from IVR about an ended call is missing. The zero value short-cuts the parameter, meaning that a call can continue arbitrarily long.	3600	Restart Changes take effect when ACE Server is restarted.
mobileMaxWrapUpTime Mobile login, max wrapup time (s).	Applies only to Mobile login (i.e. not for ACE Mobile Agent). Sets the maximum wrapup time for a mobile agent. The value is given in seconds and the agent will be automatically put in Ready status after the set time, unless the normal configuration for the wrapup time is shorter. The primary purpose is to avoid problems if the normal configuration for wrapup time is not timed. See also mobileLogin Time parameter.	300	Restart Changes take effect when ACE Server is restarted.
mobileNoAnswerTimer Mobile login/Mobile Agent, pause time when not answering an IVR call (s).	Applies to Mobile login as well as ACE Mobile Agent. Indicates how long a mobile agent will be paused at no answer. The value is given in seconds and the agent will be in status ready automatically after the set time. See also mobileLogin Time parameter.	180	Restart Changes take effect when ACE Server is restarted.
recallDirectOnFirstBusy Direct recall at first queuing to a busy extension.	Specifies whether recall shall be done directly if the number is busy/there is a queue situation the first time an operation queues on an extension with no line status.		Login Changes take effect per single agent the next time the agent logs in.
recallEscalationTime Time before a recall escalates from the operator’s personal queue. (s)	Specifies for how long a recall remains in the queuing operator’s personal queue before it escalates to the general queue from which it arrived.	45	Auto Changes take effect immediately.
recallMaxFail Max number of busy before recall to operator.	Specifies the number of routing attempts from operator there can be before the call comes back to the operator	3	Auto Changes take effect immediately.
recallQueueTime Time in seconds before recall to attendant (s)	Specifies the number of seconds a call from an operator is queued before is is taken back to the operator.	120	Auto Changes take effect immediately
recallWrapupAfterPlaceInQ wrapup for operator at queuing with recall	The purpose of this system parameter is to enable wrapup for an operator av an incoming call with recall has been queued. If the parameter is unticked, no wrapup time is given. If the parameter is 1 ticked, wrapup is applied according to current configuration of wrapup per task type.		Auto Changes take effect immediately
reminderDialogInterval Time until first reminder during call in Light Mode (s)	Number of seconds before a reminder is shown when you are in a call in Light Mode. Lowest value is 1 second. The time after the first and between following reminders is set by using the reminderDialogTimeout parameter above. Requires licence Agent - Incoming Call Light.	1	Login Changes take effect per single agent the next time the agent logs in.
reminderDialogTimeout Time until the agent is paused at unconfirmed reminder in Light Mode (s).	Number of seconds before a reminder dialogue is shown again or before the call is terminated unless you answer the question when you are in a call in Light Mode. Lowest value is 1 second. This parameter is also used to lapse between reminders. See reminderDialogInterval above.	1	Login Changes take effect per single agent the next time the agent logs in.
tasklessCallsPrivate Anonymise inbound and outbound external calls	This parameter is configured in selected Organisation area. Specifies if external calls made or received by an agent are to be regarded as private calls or not. Private calls are anonymised, i.e. the phone number identifying the called/calling person is hidden and cannot be seen in Interaction View, statistics and open interfaces such as Historic Data Interface and Recording Interface. Private calls are not only anonymised, the person's consent to be recorded is also set to No, even if the default recording consent specified in the parameter recordingConsentDefault is set to Consent not required. See Customer consent for call recordings .		Auto Changes take effect immediately
timeOutCallNeverArrived Timeout for a call which has been sent to ACE Agent	Time from when IVR considers a call delivered until ACE Agent detects the call. If time-out hits, this means that the call did not arrive. In most solutions unanswered calls are taken back to routing (or other handling) after a time-out period of (normally) 30 seconds. In such solutions, the parameter timeOutCallNeverArrived must be set to a value higher than 30 seconds. Otherwise ACE will terminate the contact before it is taken back from the agent's extension.	40	Restart Changes take effect when ACE Server is restarted.
timeOutCallNeverContinued Timeout for sessionContinue from IVR (s).	When an agent parks or places a call in queue in the IVR, the IVR is expected to quickly return with a message to ACE Server. The purpose of the timeOutCallNeverContinued time-out is to be able detect if this message is lost. If the time-out occurs, the operation will fail and the call is either lost or will continue at the agent's extension depending on the method used when parking or placing a call in queue.	45	Restart Changes take effect when ACE Server is restarted.
timeOutCallNeverDelivered Timeout for a call being routed by IVR	Time from when IVR starts its routing of the call until it considers the routing successful or unsuccessful. Time-out occurs when e.g. an IVR channel is hung up during delivery. Default is set to 30 s.	40	Restart Changes take effect when ACE Server is restarted.
timeoutIvrChannelNotResponding Timeout for messages from an IVR channel (s).	In some cases ACE Server calls for an IVR channel to send a new message with a certain time. This time-out states in seconds the size of this time.	120	Restart Changes take effect when ACE Server is restarted.
timeoutNoRoutingIvr Timeout routing decision in customer unique routing algorithm (s).	When the IVR has called for routing of a call, the routing algorithm cannot be too long in deciding where to route the call. If time-out occurs, the routing request is answered by an error code.	4	Restart Changes take effect when ACE Server is restarted.
userExnFailedTimer Time User Extension paused at failed routing. (s)	Specifies how long a User Extension shall be paused at failed routing of a call (busy, block). The value is given in seconds and the extension will automatically be in ready status after the specified time.	60	Auto Changes take effect immediately.
userExnMaxCallTime Max expected call time for User Extension. (s)	Specifies the maximum expected call time for a User Extension. The value is given in seconds and will be considered ended and the extension will be automatically ready after the specified time unless the call has been ended before that. The purpose of the parameter is to avoid unnecessarily long call times if a signal from IVR about an ended call does not come. The value zero shortcuts the parameter, meaning that a call can continue for a random time. Note that system parameters for User Extension have dependencies to other system parameters regulating recall, such as recallQueueTime	3600	Auto Changes take effect immediately.
vccPingTime Expected time between aliveReq messages from IVR (s).	Time in seconds between all aliveReq messages to ACE Server from IVR.	30	Restart Changes take effect when ACE Server is restarted.
vccPort Port number for connection of IVR.	ACE Server listens on this port for connecting IVR:s.	15000	Restart Changes take effect when ACE Server is restarted.